There will be a HazMat fee per item when shipping a dangerous goods. The HazMat fee will be charged to your UPS/DHL/FedEx collect account or added to the invoice unless the package is shipped via Ground service. Ship by air in Excepted Quantity (each bottle), which is up to 1g/1mL for class 6.1 packing group I or II, and up to 25g/25ml for all other HazMat items.
Type | HazMat fee for 500 gram (Estimated) |
Excepted Quantity | USD 0.00 |
Limited Quantity | USD 15-60 |
Inaccessible (Haz class 6.1), Domestic | USD 80+ |
Inaccessible (Haz class 6.1), International | USD 150+ |
Accessible (Haz class 3, 4, 5 or 8), Domestic | USD 100+ |
Accessible (Haz class 3, 4, 5 or 8), International | USD 200+ |
Structure of 18362-64-6
*Storage:
*Shipping:
4.5
*For Research Use Only !
Change View
Size | Price | US Stock | Global Stock | In Stock |
1g | łÇʶÊÊ | Inquiry | Inquiry | |
5g | łÇ§¶ÊÊ | Inquiry | Inquiry | |
25g | łÿʶÊÊ | Inquiry | Inquiry | |
100g | łÇóǶÊÊ | Inquiry | Inquiry |
US Stock: ship in 0-1 business day
Global Stock: ship in 5-7 days
łÇʶÊÊ
łÇ§¶ÊÊ
łÿʶÊÊ
łÇóǶÊÊ
In Stock
- +
US Stock: ship in 0-1 business day
Global Stock: ship in 2 weeks
Search for reports by entering the product batch number.
Batch number can be found on the product's label following the word 'Batch'.
Search for reports by entering the product batch number.
Batch number can be found on the product's label following the word 'Batch'.
Search for reports by entering the product batch number.
Batch number can be found on the product's label following the word 'Batch'.
Search for reports by entering the product batch number.
Batch number can be found on the product's label following the word 'Batch'.
Search for reports by entering the product batch number.
Batch number can be found on the product's label following the word 'Batch'.
CAS No. : | 18362-64-6 |
Formula : | C9H16O2 |
M.W : | 156.22 |
SMILES Code : | CC(C)C(CC(C(C)C)=O)=O |
MDL No. : | MFCD00015040 |
InChI Key : | CEGGECULKVTYMM-UHFFFAOYSA-N |
Pubchem ID : | 87597 |
GHS Pictogram: | ![]() ![]() |
Signal Word: | Danger |
Hazard Statements: | H225-H315-H319-H335 |
Precautionary Statements: | P261-P305+P351+P338 |
Class: | 3 |
UN#: | 1224 |
Packing Group: | Ⅲ |
* All experimental methods are cited from the reference, please refer to the original source for details. We do not guarantee the accuracy of the content in the reference.
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
77.3%Chromat. | With potassium tert-butylate; In DMF (N,N-dimethyl-formamide); at 50℃; for 11h;Heating / reflux; | In a 1-liter four-necked flask, 103 g of DMF and 1.33mol (149 g) of tert-butoxypotassium were placed, and theywere heated up to 50C with stirring by a mechanicalstirrer. Then, a liquid mixture consisting of 2.64 mol(307 g) of ethyl isobutyrate and 0.88 mol (75.6 g) of 3-methyl-2-butanone, was added by a dropping funnel over aperiod of 3 hours, followed by further stirring for 8hours under heating. It was confirmed by gaschromatography that 2,6-dimethyl-3,5-heptanedione was produced in an amount of 0.68 mol (107 g) in the solution(yield: 77.3% (based on 3-methylbutanone)). |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
100% | With hydrazine; In ethanol; at 20℃; for 2h; | Hydrazine (330 mg, 10 mmol) was added to a solution of 2,6-dimethylheptane-3,5- dione (1.6 g, 10 mmol) in ethanol (40 mL) at room temperature. After 2 hours, the reaction was concentrated in vacuo to afford 3, 5-diisopropyl-lH-pyrazole (1.5 g, 10 mmol, yield: 100%) which was used in the next step without further purification. MS: m/z 153.1 (M+H+). |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
20% | With caesium carbonate; copper(l) chloride; In 1-methyl-pyrrolidin-2-one; at 120℃; for 60h; | (1) Production of 2-methoxy-3-(4-(trifluoromethoxy)phenoxy]pyridine: 2,6-Dimethylheptane-3,5-dione (0.019 mL, 0.085 mmol), copper(I) chloride (43 mg, 0.43 mmol) and cesium carbonate (554 mg, 1.70 mmol) were added to an NMP (2 mL) solution of 3-iodo-2-methoxypyridine (200 mg, 0.85 mmol), and stirred for 2.5 days in the presence of nitrogen at 120C. Aqueous saturated sodium hydrogencarbonate solution was added to the reaction liquid, then the insoluble matter was removed by filtration through Celite, followed by extraction with ethyl acetate. The obtained organic layer was washed with aqueous saturated sodium hydrogencarbonate solution, then dried with anhydrous sodium sulfate, and filtered. The obtained filtrate was concentrated under reduced pressure, then the residue was purified by silica gel column chromatography (hexane:ethyl acetate = 10:0 to 17:3) to obtain the entitled compound (49 mg, 20 %). Mass Spectrum (ESI): 286.0 (M+H). |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
88.2% | With sodium methylate; In methanol; at 20℃; for 1h; | In 20 g of methanol, 7.20 g (0.0400 mol) of a sodiummethylate methanol solution of 30% purity was dissolved,and the resulting solution was cooled to room temperature. Then, 7.19 g (0.0400 mol) of <strong>[18362-64-6]2,6-dimethyl-3,5-heptanedione</strong> of 87% purity was dropwise added withstirring. Then, 4.83 g (0.0300 mol) of Cu (N03) 2- 6H20 wasadded. After the reaction was conducted for 1 hour, 100g of water was added over a period of 30 minutes,followed by stirring for 1 hour. The resulting crystalswere filtered off and dried. Thus, 7.23 g (yield: 88.2%)of bis(2,6-dimethyl-3,5-heptanedionato)copper wasobtained. |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
95.9% | With sodium methylate; In methanol; at 25 - 28℃; for 1.5h; | In 178 g of methanol, 66.9 g (0.372 mol) of a sodiummethylate methanol solution of 30% purity was dissolved,and the resulting solution was cooled to room temperature.Then, 66.0 g (0.377 mol) of <strong>[18362-64-6]2,6-dimethyl-3,5-heptanedione</strong>of 88% purity was dropwise added with stirring. To themixture, a solution obtained by dissolving 50.0 g (0.124mol) of Fe(N03)3-9H20 of 99% purity in 12.0 g of methanolwas added at a temperature of 25 to 28C over a period of30 minutes. The reaction was conducted for 1 hour, andthe crystals precipitated were filtered off. To theresulting solution, 400 g of water was dropwise addedover a period of 1 hour and 30 minutes. After thedropwise addition was completed, stirring was performedfor 1 hour. The resulting crystals were taken out by centrifugation and then dried. Thus, 62.0 g (yield:95.9%) of tris(2, 6-dimethyl-3,5-heptanedionato)iron wasobtained. |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
97.5% | In methanol; at 20℃; for 1.08333h; | To 300 g of methanol, 77.1 g (0.429 mol) of <strong>[18362-64-6]2,6-dimethyl-3,5-heptanedione</strong> of 87% purity was dropwiseadded with stirring. To the resulting solution, asolution, which had been obtained by dissolving 25.0 g(0.106 mol) of ZrCl4 of 99% purity in 100 g of methanoland cooled to room temperature, was dropwise added over aperiod of about 5 minutes. The reaction was conductedfor 1 hour with stirring, and 1000 g of water was addedover a period of 1 hour. Then, stirring was performedfor 1 hour. The resulting solution was adjusted to pH6.6 with a 20% NaOH solution. The resulting crystalswere collected by centrifugation and then dried. Thus,74.5 g (yield: 97.5%) of tetrakis (2, 6-dimethyl-3,5-- heptanedionato) zirconium was obtained. |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
50.2% | With sodium methylate; In methanol; at 25 - 28℃; for 1.5h; | In 51.4 g of methanol, 14.5 g (0.081 mol) of asodium methylate methanol solution of 30% purity wasdissolved with stirring, and the resulting solution wascooled to room temperature. Then, 12.65 g (0.081 mol) of<strong>[18362-64-6]2,6-dimethyl-3,5-heptanedione</strong> of 97% purity was addedlittle by little. To the mixture, a solution obtained bydissolving 12.63 g (0.0268 mol) of Y(N03)3-6H20 of 81.3% purity (determined by quantitative analysis) in 63.2 g ofmethanol was added at a temperature of 25 to 28C over aperiod of 30 minutes. The reaction was conducted for 1hour, and the crystals precipitated were filtered off.The separated crystals were subjected torecrystallization using ethyl butyrate as a solvent.Thus, 7.46 g (yield: 50.2%) of tris(2,6-dimethyl-3,5-heptanedionato)yttrium was obtained |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
73% | With sodium carbonate; In 2-ethoxy-ethanol; at 20℃; for 24h; | [0117] Example 3: Synthesis of Compound 3Compound 3[0118] Synthesis of Compound 3. Iridium dimer (2.6 g, 1.616 mmol) from the previous step, <strong>[18362-64-6]2,6-dimethylheptane-3,5-dione</strong> (2.6 g, 16.16 mmol), Na2C03 (1.713 g, 16.16 mmol) and 2- ethoxyethanol (60 mL) were stirred at room temperature for 24 h. The precipitate was filtered and washed with methanol. The solid was further purified by passing it through a silica gel plug (that was pretreated with 15% triethylamine in hexanes) and eluted with methylene chloride. 2- Propanol was added to the filtrate. The filtrate was concentrated, but not to dryness. 2.2 g of product (73%) was obtained after filtration. The product was confirmed by LC-MS. |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
73% | With sodium carbonate; In 2-ethoxy-ethanol; for 4h;Inert atmosphere; Microwave irradiation; Heating; | Step 4: Synthesis of Bis{4,6-dimethyl-2-[3,5-bis(3,5-dimethylphenyl)-2-pyrazinyl-κN]phenyl-κC}(2,6-dimethyl-3,5-heptanedionato-κ2O,O′)iridium(III) (abbreviation: [Ir(dmtppr)2(dibm)]) [0395] Further, into a recovery flask equipped with a reflux pipe were put 30 mL of 2-ethoxyethanol, 0.89 g of [Ir(dmtppr)2Cl]2 (abbreviation) that is the dinuclear complex obtained in Step 3, 0.20 g of <strong>[18362-64-6]diisobutyrylmethane</strong> (abbreviation: Hdibm), and 0.47 g of sodium carbonate, and the air in the flask was replaced with argon. Then, irradiation with microwaves (2.45 GHz, 200 W) was performed for 60 minutes. Here, 0.20 g of Hdibm was added, and irradiation with microwaves (2.45 GHz, 200 W) was performed again for 60 minutes. The solvent was distilled off and 0.20 g of Hdibm, 0.47 g of sodium carbonate, and 30 mL of 2-ethoxyethanol were added. The air in the flask was replaced with argon. After that, heating was performed by irradiation with microwaves (2.45 GHz, 200 W) for 2 hours. The solvent was distilled off, and the obtained residue was suction-filtered with ethanol. The obtained solid was washed with water and ethanol. The obtained solid was dissolved in dichloromethane and filtered through a filter aid in which Celite, alumina, and Celite were stacked in that order. Then, recrystallization was carried out with a mixed solvent of dichloromethane and ethanol; thus, [Ir(dmtppr)2(dibm)](abbreviation), the organometallic complex that is one embodiment of the present invention, was obtained as a dark red powder in a yield of 73%. A synthesis scheme of Step 4 is shown in (f-4). [0396] An analysis result by nuclear magnetic resonance (1H-NMR) spectroscopy of the dark red powder obtained in Step 4 is described below. FIG. 47 shows the 1H-NMR chart. These results revealed that [Ir(dmtppr)2(dibm)](abbreviation), the organometallic complex which is one embodiment of the present invention represented by Structural Formula (123), was obtained in Synthesis Example 6. [0397] 1H-NMR. δ(CDCl3): 0.78 (d, 6H), 0.99 (d, 6H), 1.41 (s, 6H), 1.96 (s, 6H), 2.24-2.30 (m, 2H), 2.35 (s, 12H), 2.42 (s, 12H), 5.07 (s, 1H), 6.46 (s, 2H), 6.78 (s, 2H), 7.04 (s, 2H), 7.18 (s, 2H), 7.47 (s, 2H), 7.49 (s, 2H), 7.67 (s, 4H), 8.77 (s, 2H). [0398] Next, an ultraviolet-visible absorption spectrum (hereinafter, simply referred to as an “absorption spectrum”) of a dichloromethane solution of [Ir(dmtppr)2(dibm)](abbreviation) and an emission spectrum thereof were measured. The measurement of the absorption spectrum was conducted at room temperature, for which an ultraviolet-visible light spectrophotometer (V550 type manufactured by Japan Spectroscopy Corporation) was used and the dichloromethane solution (0.068 mmol/L) was put in a quartz cell. In addition, the measurement of the emission spectrum was conducted at room temperature, for which a fluorescence spectrophotometer (FS920 manufactured by Hamamatsu Photonics K. K.) was used and the degassed dichloromethane solution (0.31 μmol/L) was put in a quartz cell. Measurement results of the obtained absorption and emission spectra are shown in FIG. 48, in which the horizontal axis represents wavelength and the vertical axes represent absorption intensity and emission intensity. In FIG. 48 where there are two solid lines, the thin line represents the absorption spectrum and the thick line represents the emission spectrum. Note that the absorption spectrum in FIG. 48 is the results obtained in such a way that the absorption spectrum measured by putting only dichloromethane in a quartz cell was subtracted from the absorption spectrum measured by putting the dichloromethane solution (0.068 mmol/L) in a quartz cell. [0399] As shown in FIG. 48, [Ir(dmtppr)2(dibm)](abbreviation), the organometallic complex that is one embodiment of the present invention, has an emission peak at around 629 nm, and reddish orange light emission was observed from the dichloromethane solution. [0400] Next, [Ir(dmtppr)2(dibm)](abbreviation) obtained in this example was analyzed by liquid chromatography mass spectrometry (LC/MS). [0401] In the analysis by LC/MS, liquid chromatography (LC) separation was carried out with ACQUITY UPLC (manufactured by Waters Corporation) and mass spectrometry (MS) analysis was carried out with Xevo G2 T of MS (manufactured by Waters Corporation). ACQUITY UPLC BEH C8 (2.1×100 mm, 1.7 μm) was used as a column for the LC separation, and the column temperature was 40 C. Acetonitrile was used for Mobile Phase A and a 0.1% formic acid aqueous solution was used for Mobile Phase B. Further, a sample was prepared in such a manner that [Ir(dmtppr)2(dibm)](abbreviation) was dissolved in chloroform at a given concentration and the mixture was diluted with acetonitrile. The injection amount was 5.0 μL. [0402] In the LC separation, a gradient method in which the composition of mobile phases is changed was employed. The ratio of Mobile Phase A to Mobile Phase B was 90:10 for 0 to 1 minute after the start of the measurement. Then,... |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
75% | With sodium carbonate; In 2-ethoxy-ethanol; for 1h;Inert atmosphere; Microwave irradiation; Heating; | Step 4: Synthesis of Bis{4,6-dimethyl-2-[3-(3,5-dimethylphenyl)-5-phenyl-2-pyrazinyl-κN]phenyl-κC}(2,6-dimethyl-3,5-heptanedionato-κ2O,O′)iridium(III) (abbreviation: [Ir(dmdppr-P)2(dibm)]) [0278] Further, into a recovery flask equipped with a reflux pipe were put 30 mL of 2-ethoxyethanol, 0.94 g of [Ir(dmdppr-P)2Cl]2 that is the dinuclear complex obtained in Step 3, 0.23 g of <strong>[18362-64-6]diisobutyrylmethane</strong> (abbreviation: Hdibm), and 0.52 g of sodium carbonate, and the air in the flask was replaced with argon. After that, heating was performed by irradiation with microwaves (2.45 GHz, 120 W) for 60 minutes. The solvent was distilled off, and the obtained residue was suction-filtered with ethanol. The obtained solid was washed with water and ethanol and recrystallization was carried out with a mixed solvent of dichloromethane and ethanol, so that [Ir(dmdppr-P)2(dibm)](abbreviation), the organometallic complex that is one embodiment of the present invention, was obtained as a dark red powder in a yield of 75%. A synthesis scheme of Step 4 is shown in (a-4). An analysis result by nuclear magnetic resonance (1H-NMR) spectroscopy of the dark red powder obtained by the above-described synthesis method is described below. FIG. 9 shows the 1H-NMR chart. These results revealed that [Ir(dmdppr-P)2(dibm)](abbreviation), the organometallic complex which is one embodiment of the present invention represented by Structural Formula (100), was obtained in Synthesis Example 1. [0280] 1H-NMR. δ(CDCl3): 0.79 (d, 6H), 0.96 (d, 6H), 1.41 (s, 6H), 1.96 (s, 6H), 2.24-2.28 (m, 2H), 2.41 (s, 12H), 5.08 (s, 1H), 6.46 (s, 2H), 6.82 (s, 2H), 7.18 (s, 2H), 7.39-7.50 (m, 10H), 8.03 (d, 4H), 8.76 (s, 2H). [0281] Next, an ultraviolet-visible absorption spectrum (hereinafter, simply referred to as an “absorption spectrum”) of a dichloromethane solution of [Ir(dmdppr-P)2(dibm)](abbreviation) and an emission spectrum thereof were measured. The measurement of the absorption spectrum was conducted at room temperature, for which an ultraviolet-visible light spectrophotometer (V550 type manufactured by Japan Spectroscopy Corporation) was used and the dichloromethane solution (0.062 mmol/L) was put in a quartz cell. In addition, the measurement of the emission spectrum was conducted at room temperature, for which a fluorescence spectrophotometer (FS920 manufactured by Hamamatsu Photonics K. K.) was used and the degassed dichloromethane solution (0.010 mmol/L) was put in a quartz cell. Measurement results of the obtained absorption and emission spectra are shown in FIG. 10, in which the horizontal axis represents wavelength and the vertical axes represent absorption intensity and emission intensity. In FIG. 10 where there are two solid lines, the thin line represents the absorption spectrum and the thick line represents the emission spectrum. Note that the absorption spectrum in FIG. 10 is the results obtained in such a way that the absorption spectrum measured by putting only dichloromethane in a quartz cell was subtracted from the absorption spectrum measured by putting the dichloromethane solution (0.062 mmol/L) in a quartz cell. [0282] As shown in FIG. 10, [Ir(dmdppr-P)2(dibm)](abbreviation), the organometallic complex that is one embodiment of the present invention, has an emission peak at around 640 nm, and reddish orange light emission was observed from the dichloromethane solution. [0283] Further, weight loss percentage of [Ir(dmdppr-P)2(dibm)](abbreviation) was measured by a high vacuum differential type differential thermal balance (TG/DTA 2410SA, manufactured by Bruker AXS K. K.). The temperature was increased at a rate of 10. C./min under a degree of vacuum of 1×10-3 Pa. As a result, the weight loss percentage of [Ir(dmdppr-P)2(dibm)](abbreviation), the organometallic complex that is one embodiment of the present invention, was found to be 100% as shown in FIG. 37, which indicated a favorable sublimation property of the organometallic complex. As a comparative example, the weight loss percentage of Compound A in which methyl groups are not bonded to the 3-position and the 5-position is shown. A comparison with a weight loss percentage of 78% of Compound A revealed that the organometallic complex that is one embodiment of the present invention has an improved sublimation property by having the methyl groups at the 3-position and the 5-position. |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
62% | With sodium carbonate; In 2-ethoxy-ethanol; for 1h;Inert atmosphere; Microwave irradiation; Heating; | Step 3: Synthesis of Bis{2-[6-(3,5-dimethylphenyl)-4-pyrimidinyl-κN3]-4,6-dimethylphenyl-κC}(2,6-dimethyl-3,5-heptanedionato-κ2O,O′)iridium(III) (abbreviation: [Ir(dmdppm)2(dibm)]) [0288] Further, into a recovery flask equipped with a reflux pipe were put 30 mL of 2-ethoxyethanol, 1.09 g of [Ir(dmdppm)2Cl]2 (abbreviation) that is the dinuclear complex obtained in Step 2, 0.32 g of <strong>[18362-64-6]diisobutyrylmethane</strong> (abbreviation: Hdibm), and 0.72 g of sodium carbonate, and the air in the flask was replaced with argon. After that, heating was performed by irradiation with microwaves (2.45 GHz, 120 W) for 60 minutes. The solvent was distilled off, and the obtained residue was suction-filtered with ethanol. The obtained solid was washed with water and ethanol and recrystallization was carried out with a mixed solvent of dichloromethane and ethanol, so that [Ir(dmdppm)2(dibm)](abbreviation), the organometallic complex that is one embodiment of the present invention, was obtained as a red powder in a yield of 62%. A synthesis scheme of Step 3 is shown in (b-3). [0289] An analysis result by nuclear magnetic resonance (1H-NMR) spectroscopy of the red powder obtained by the above-described synthesis method is described below. FIG. 11 shows the 1H-NMR chart. These results revealed that [Ir(dmdppm)2(dibm)](abbreviation), the organometallic complex which is one embodiment of the present invention represented by Structural Formula (107), was obtained in Synthesis Example 2. [0290] 1H-NMR. δ(CDCl3): 0.69 (d, 6H), 0.82 (d, 6H), 1.51 (s, 6H), 2.17-2.23 (m, 2H), 2.31 (s, 6H), 2.45 (s, 12H), 5.19 (s, 1H), 6.61 (s, 2H), 7.17 (s, 2H), 7.56 (s, 2H), 7.82 (s, 4H), 8.11 (d, 2H), 8.88 (d, 2H). [0291] Next, an ultraviolet-visible absorption spectrum (hereinafter, simply referred to as an “absorption spectrum”) of a dichloromethane solution of [Ir(dmdppm)2(dibm)](abbreviation) and an emission spectrum thereof were measured. The measurement of the absorption spectrum was conducted at room temperature, for which an ultraviolet-visible light spectrophotometer (V550 type manufactured by Japan Spectroscopy Corporation) was used and the dichloromethane solution (0.072 mmol/L) was put in a quartz cell. In addition, the measurement of the emission spectrum was conducted at room temperature, for which a fluorescence spectrophotometer (FS920 manufactured by Hamamatsu Photonics K. K.) was used and the degassed dichloromethane solution (0.072 mmol/L) was put in a quartz cell. Measurement results of the obtained absorption and emission spectra are shown in FIG. 12, in which the horizontal axis represents wavelength and the vertical axes represent absorption intensity and emission intensity. In FIG. 12 where there are two solid lines, the thin line represents the absorption spectrum and the thick line represents the emission spectrum. Note that the absorption spectrum in FIG. 12 is the results obtained in such a way that the absorption spectrum measured by putting only dichloromethane in a quartz cell was subtracted from the absorption spectrum measured by putting the dichloromethane solution (0.072 mmol/L) in a quartz cell. [0292] As shown in FIG. 12, [Ir(dmdppm)2(dibm)](abbreviation), the organometallic complex that is one embodiment of the present invention, has an emission peak at around 609 nm, and reddish orange light emission was observed from the dichloromethane solution. |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
48% | With sodium carbonate; In 2-ethoxy-ethanol; for 1h;Inert atmosphere; Microwave irradiation; Heating; | Step 4: Synthesis of Bis{4,6-dimethyl-2-[5-(2,6-dimethylphenyl)-3-(3,5-dimethylphenyl)-2-pyrazinyl-κN]phenyl-κC}(2,6-dimethyl-3,5-heptanedionato-κ2O,O′)iridium(III) (abbreviation: [Ir(dmdppr-dmp)2(dibm)]) [0411] Further, into a recovery flask equipped with a reflux pipe were put 30 mL of 2-ethoxyethanol, 0.80 g of [Ir(dmdppr-dmp)2Cl]2 (abbreviation) that is the dinuclear complex obtained in Step 3, 0.19 g of <strong>[18362-64-6]diisobutyrylmethane</strong> (abbreviation: Hdibm), and 0.42 g of sodium carbonate, and the air in the flask was replaced with argon. After that, heating was performed by irradiation with microwaves (2.45 GHz, 120 W) for 60 minutes. The solvent was distilled off, and the obtained residue was dissolved in dichloromethane and filtered through a filter aid in which Celite, alumina, and Celite were stacked in that order. Then, recrystallization was carried out with a mixed solvent of dichloromethane and methanol; thus, [Ir(dmdppr-dmp)2(dibm)](abbreviation), the organometallic complex that is one embodiment of the present invention, was obtained as a red powder in a yield of 48%. A synthesis scheme of Step 4 is shown in (g-4). [0412] An analysis result by nuclear magnetic resonance (1H-NMR) spectroscopy of the red powder obtained in Step 4 is described below. FIG. 50 shows the 1H-NMR chart. These results revealed that [Ir(dmdppr-dmp)2(dibm)] (abbreviation), the organometallic complex which is one embodiment of the present invention represented by Structural Formula (124), was obtained in Synthesis Example 7. [0413] 1H-NMR. δ(CDCl3): 0.80 (d, 6H), 0.81 (d, 6H), 1.47 (s, 6H), 1.95 (s, 6H), 2.10 (s, 12H), 2.23-2.28 (m, 2H), 2.34 (s, 12H), 5.19 (s, 1H), 6.48 (s, 2H), 6.81 (s, 2H), 7.06 (d, 4H), 7.11 (s, 2H), 7.16 (t, 2H), 7.40 (s, 4H), 8.22 (s, 2H). [0414] Next, an ultraviolet-visible absorption spectrum (hereinafter, simply referred to as an “absorption spectrum”) of a dichloromethane solution of [Ir(dmdppr-dmp)2(dibm)](abbreviation) and an emission spectrum thereof were measured. The measurement of the absorption spectrum was conducted at room temperature, for which an ultraviolet-visible light spectrophotometer (V550 type manufactured by Japan Spectroscopy Corporation) was used and the dichloromethane solution (0.059 mmol/L) was put in a quartz cell. In addition, the measurement of the emission spectrum was conducted at room temperature, for which a fluorescence spectrophotometer (FS920 manufactured by Hamamatsu Photonics K. K.) was used and the degassed dichloromethane solution (0.059 mmol/L) was put in a quartz cell. Measurement results of the obtained absorption and emission spectra are shown in FIG. 51, in which the horizontal axis represents wavelength and the vertical axes represent absorption intensity and emission intensity. In FIG. 51 where there are two solid lines, the thin line represents the absorption spectrum and the thick line represents the emission spectrum. Note that the absorption spectrum in FIG. 51 is the results obtained in such a way that the absorption spectrum measured by putting only dichloromethane in a quartz cell was subtracted from the absorption spectrum measured by putting the dichloromethane solution (0.059 mmol/L) in a quartz cell. [0415] As shown in FIG. 51, [Ir(dmdppr-dmp)2(dibm)](abbreviation), the organometallic complex that is one embodiment of the present invention, has an emission peak at around 616 nm, and reddish orange light emission was observed from the dichloromethane solution. [0416] Further, weight loss percentage of [Ir(dmdppr-dmp)2(dibm)](abbreviation) was measured by a high vacuum differential type differential thermal balance (TG/DTA 2410SA, manufactured by Bruker AXS K. K.). The temperature was increased at a rate of 10 C./min under a degree of vacuum of 1×10-3 Pa. As a result, the weight loss percentage of [Ir(dmdppr-dmp)2(dibm)](abbreviation), the organometallic complex that is one embodiment of the present invention, was found to be 100% as shown in FIG. 52, which indicated a favorable sublimation property of the organometallic complex. [0417] Next, [Ir(dmdppr-dmp)2(dibm)](abbreviation) obtained in this example was analyzed by liquid chromatography mass spectrometry (LC/MS). [0418] In the analysis by LC/MS, liquid chromatography (LC) separation was carried out with ACQUITY UPLC (manufactured by Waters Corporation) and mass spectrometry (MS) analysis was carried out with Xevo G2 T of MS (manufactured by Waters Corporation). ACQUITY UPLC BEH C8 (2.1×100 mm, 1.7 m) was used as a column for the LC separation, and the column temperature was 40 C. Acetonitrile was used for Mobile Phase A and a 0.1% formic acid aqueous solution was used for Mobile Phase B. Further, a sample was prepared in such a manner that [Ir(dmdppr-dmp)2(dibm)](abbreviation) was dissolved in chloroform at a given concentration and the mixture was diluted with acetonitrile. The injection amount was 5.0 μL. [0419] In the LC separation, a gradient method in which the composition of mobile phases is c... |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
55% | With sodium iodide dichloride; In tetrahydrofuran; water;Reflux; | General procedure: To a mixture of o-substituted (-NH2 or -SH or -OH) anilines(1.0 mmol) and appropriate 1,3-diketones (1.1 mmol) in THF(5 mL) was added 30%w/w aqueous NaICl2 (0.2 mmol, 20mol%). The reaction was allowed to remain stirred at refluxtemperature for 2-3 h. After the reaction was complete, asindicated by TLC, the mixture was cooled to room temperature.The volatiles were removed under reduced pressureand treated successively with aqueous sodium thiosulphatesolution and saturated solution of NaHCO3, and extractedby ethylacetate (2×10 mL). The combined organic phaseswere washed with brine and dried over Na2SO4 and evaporatedunder vacuum. The crude reaction mixture was purifiedby column chromatography on silica gel using petroleumether/ethyl acetate as eluents. |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
80% | In dichloromethane; at 20℃; for 2.5h;Inert atmosphere; | General procedure: To a solution of carbonyl compound (1.0-2.0 equiv) in CH2Cl2 or 1,2-dichloroethane, Tf2CHCH2CHTf2(5, 0.50 mmol) was added at room temperature. After stirring at room temperature to 80 C, the reaction mixture was concentrated under reduced pressure. The resultant residue was purified by bulb-to-bulb distillation using a Kugelrohr oven to give bis(triflyl)ethylated product 4. |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
63%; 6% | With sodium bisulfate supported on silica gel; In 1,2-dichloro-ethane; at 80℃; for 5h; | General procedure: A mixture of -diketones 1 (6 mmol), o-hydroxybenzyl alcohols 2 (2 mmol) and NaHSO4/SiO2 (2.1mmol, 1.0 g) in dichloroethane (10 mL) was stirred at 80 C for 5 h, and then the used supportedreagent was removed by filtration. The filtrate was evaporated to leave crude product, which waspurified by column chromatography (hexane/ethyl acetate) to obtain 3. |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
41.2% | With oxidobis(quinolin-8-olato)vanadium(IV); oxygen; In 1,2-dichloro-ethane; at 80℃; under 760.051 Torr; for 72h; | General procedure: A mixture of acetylacetone (58 mmol) and catalyst (0.07-0.14 mmol,unless otherwise stated) was placed into a three-necked flask. Then theone-pot tandem reactionwas performed at 80 C or specific temperaturefor the appropriate time under1 atmO2 supplied continuously by a commonlyusedwater-seal system[18]. A small amount ofmixture was takenout using a syringe. After centrifugation, the mixture was analyzed withan Agilent-6890 gas chromatograph. The identification of products wasdone by GC-MS (Varian Saturn 2100T; injector temperature: 250 C, columntemperature from 80 C to 200 C for β = 7 C/min). The resultingproduct was purified by silica gel column chromatography usingamixedsolvent of n-hexane and ethyl acetate (3:1, v/v) as the eluent. The isolatedproduct was determined by 13C NMR (125 MHz, CDCl3), 1H NMR(500 MHz, CDCl3), GC-MS and FT-IR analysis. Transformation of otherβ-diketones was performed according to the procedure described above. |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
15%; 44% | With copper diacetate; manganese triacetate; In acetonitrile; at 80℃; | General procedure: A mixture of 2-(allylamino)-1,4-naphthoquinone (1; 405 mg, 1.90mmol), pentane-2,4-dione (2a; 772 mg, 7.72 mmol), Cu(OAc)2(463 mg, 2.32 mmol), and Mn(OAc)3 (2.57 g, 9.58 mmol) in MeCN(35 mL) was stirred at 80 C for 5 h [the dark brown color ofMn(OAc)3 disappeared], which was followed by the addition ofpentane-2,4-dione (2a; 779 mg, 7.79 mmol) and Mn(OAc)3 (2.53 g,9.44 mmol). The reaction mixture was stirred for another 3 h. Afterworkup as described as above, the residue was chromatographedover silica gel (40 g, eluted with CH2Cl2-hexane), followed by crystallization(EtOAc-hexane), to give 3a [yield: 28 mg (5%)] and 4a[yield: 307 mg (50%)]. |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
88% | With copper(l) iodide; caesium carbonate; In dimethyl sulfoxide; at 120℃; for 12h;Inert atmosphere; | General procedure: Under argon protection conditions,The CuI (9.55 mg, 0.05 mmol) and Cs2CO3 (652 mg, 2.0 mmol)Placed in a dry 25 mL two-necked flask, 5 mL of dry DMSO was added,Compound II-1 (170 mg, 1.0 mmol) was added in turnCompound III-1 (200 mg, 2.0 mmol) was added with stirring,The reaction was carried out at 90 C for about 12 hours (the time required to stop the reaction by TLC), cooled to room temperature, extracted three times with saturated brine and ethyl acetate, the organic phases were combined and the ethyl acetate was distilled off under reduced pressure.The residue was chromatographed on silica gel column chromatography (n-hexane: ethyl acetate = 25: 1 (v / v)) to give a white solid (compound I-1), m.p. 94.6-95.3 C, yield 88% |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
3.40 g | With sodium butanolate; In ethanol; chloroform; at 20℃; for 6h;Inert atmosphere; | General procedure: A argon-filled Schlenk vessel equipped with a magnetic stir barwas charged with 37% aqueous formaldehyde solution (1.47 mL,20 mmol) and α,ω-dithiol (10 mmol) stirred for 30 min. 1,3-Diketone (20 mmol) and the catalyst (0.5 mmol), or tandem catalyst (every 0.5 mmol), or promoter (10-20 mmol) in 2.5 mL ofCHCl3and 2.5 mL of C2H5OH were added. The mixture was stirredfor 6 h atw20C. The product mixture wasfiltered through a layerof SiO2; the filtrate was dried with Na2SO4and evaporated. Substances are separated by column chromatography on SiO2(eluenthexane/chloroform/ethyl acetate, 1:1:4) to give the target product. |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
36% | With iron(III) chloride hexahydrate; In water; at 100℃; for 24h;Green chemistry; | General procedure: A flask was charged with 2-aminobenzamide (1a; 27.2 mg, 0.2 mmol), pentane-2,4-dione (2A;30.0 mg, 0.3 mmol), FeCl3·6H2O (10.8 mg, 0.04 mmol), and PEG-400/H2O (1.0 mL, 1:9 (v/v)).The reaction was stirred at 100 C for 24 h. When the reaction was complete monitored by TLC,the mixture was cooled to room temperature, extracted with EtOAc (3×20 mL). The combined organic phase was washed with water, dried over anhydrous Na2SO4, filtered, and concentrated under reduced pressure. The residue was purified by silica gel column chromatography to give the product 3aA (29.3 mg, 91%) as white solid. |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
94% | In isopropyl alcohol; at 85℃; | Into a 100-mL round-bottom flask, was placed 2-propanol (50 mL), phenylhydrazine (3.81 g, 35.2 mmol) and <strong>[18362-64-6]2,6-dimethylheptane-3,5-dione</strong> (5.0 g, 32.0 mmol). The resulting solution was stirred overnight at 85C in an oil bath. The resulting mixture was concentrated. The residue was dissolved in 100 mL of ethyl acetate. The resulting mixture was washed with 50 mL of H2O. The mixture was dried over anhydrous sodium sulfate and then concentrated. This resulted in 6.9 g (94%) of the title compound as a light yellow oil. MS-ESI: 229 (M+l). |
90% | In water; glycerol; at 90℃; for 0.583333h;Green chemistry; | General procedure: General procedure: Glycerol (2 mL) was dissolved inwater (2 mL), then phenylhydrazine derivative (1 mmol) wasadded under stirring and the reaction mixture was heated to90 C followed by addition of 1,3-dicarbonyl compounds(1 mmol). The progress of reaction was monitored by TLC.When all the starting material had been consumed, the mixturewas cooled to room temperature and extracted with ethylacetate (2 × 5 mL). The organic phase was separated and driedover anhydrous Na2SO4 and evaporated under reduced pressureto give crude product. The pure product was isolated by silicagel column chromatography to give the product as a yellowoil or powder. |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
56% | With 2,2'-azobis(isobutyronitrile); oxygen; In acetonitrile; at 80℃; for 24h;Sealed tube; | General procedure: A sealed tube was equipped with a magnetic stir bar was charged with 1,3-di-ketone 1a (0.075 g, 0.75 mmol), aniline 2a (0.0232 g, 0.25 mmol), AIBN (0.0164 g, 0.0001 mmol), and acetonitrile (1.0 mL). The above reaction mixture was stirred at 80C under O2 atmosphere for 24 h. After completion of the reaction, the reaction was then cooled to room temperature, mixture was diluted with ethyl acetate. After removal of the solvent under reduced pressure the left out residue was purified by column chromatography using silica gel with hexane and ethyl acetate as eluent to get 3a in 82% yield (0.0278 g). The spectral data was well matched with reported values. The above procedure is followed for the synthesis of all products reported in this manuscript. |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
With sodium tetrahydroborate; sodium hydroxide; In methanol; water; at 5℃; | 2,6-Dimethyl-3,5-heptanedione (7.1 g) and methanol (15 mL) was added dropwise to the mixture (1.25 g) at 5 CSodium borohydride, 0.025 g of sodium hydroxide and 25 mL of water. After completion of the dropwise addition, distillation was performed under reduced pressureThe solvent was removed and extracted with 20 mL of ethyl acetate for 10 h. Removal of the solvent, distillation under reduced pressure,The fractions were collected to give colorless liquid, 2,6-dimethyl-3,5-heptanediol, in 90% yield. |
Tags: 18362-64-6 synthesis path| 18362-64-6 SDS| 18362-64-6 COA| 18362-64-6 purity| 18362-64-6 application| 18362-64-6 NMR| 18362-64-6 COA| 18362-64-6 structure
Precautionary Statements-General | |
Code | Phrase |
P101 | If medical advice is needed,have product container or label at hand. |
P102 | Keep out of reach of children. |
P103 | Read label before use |
Prevention | |
Code | Phrase |
P201 | Obtain special instructions before use. |
P202 | Do not handle until all safety precautions have been read and understood. |
P210 | Keep away from heat/sparks/open flames/hot surfaces. - No smoking. |
P211 | Do not spray on an open flame or other ignition source. |
P220 | Keep/Store away from clothing/combustible materials. |
P221 | Take any precaution to avoid mixing with combustibles |
P222 | Do not allow contact with air. |
P223 | Keep away from any possible contact with water, because of violent reaction and possible flash fire. |
P230 | Keep wetted |
P231 | Handle under inert gas. |
P232 | Protect from moisture. |
P233 | Keep container tightly closed. |
P234 | Keep only in original container. |
P235 | Keep cool |
P240 | Ground/bond container and receiving equipment. |
P241 | Use explosion-proof electrical/ventilating/lighting/equipment. |
P242 | Use only non-sparking tools. |
P243 | Take precautionary measures against static discharge. |
P244 | Keep reduction valves free from grease and oil. |
P250 | Do not subject to grinding/shock/friction. |
P251 | Pressurized container: Do not pierce or burn, even after use. |
P260 | Do not breathe dust/fume/gas/mist/vapours/spray. |
P261 | Avoid breathing dust/fume/gas/mist/vapours/spray. |
P262 | Do not get in eyes, on skin, or on clothing. |
P263 | Avoid contact during pregnancy/while nursing. |
P264 | Wash hands thoroughly after handling. |
P265 | Wash skin thouroughly after handling. |
P270 | Do not eat, drink or smoke when using this product. |
P271 | Use only outdoors or in a well-ventilated area. |
P272 | Contaminated work clothing should not be allowed out of the workplace. |
P273 | Avoid release to the environment. |
P280 | Wear protective gloves/protective clothing/eye protection/face protection. |
P281 | Use personal protective equipment as required. |
P282 | Wear cold insulating gloves/face shield/eye protection. |
P283 | Wear fire/flame resistant/retardant clothing. |
P284 | Wear respiratory protection. |
P285 | In case of inadequate ventilation wear respiratory protection. |
P231 + P232 | Handle under inert gas. Protect from moisture. |
P235 + P410 | Keep cool. Protect from sunlight. |
Response | |
Code | Phrase |
P301 | IF SWALLOWED: |
P304 | IF INHALED: |
P305 | IF IN EYES: |
P306 | IF ON CLOTHING: |
P307 | IF exposed: |
P308 | IF exposed or concerned: |
P309 | IF exposed or if you feel unwell: |
P310 | Immediately call a POISON CENTER or doctor/physician. |
P311 | Call a POISON CENTER or doctor/physician. |
P312 | Call a POISON CENTER or doctor/physician if you feel unwell. |
P313 | Get medical advice/attention. |
P314 | Get medical advice/attention if you feel unwell. |
P315 | Get immediate medical advice/attention. |
P320 | |
P302 + P352 | IF ON SKIN: wash with plenty of soap and water. |
P321 | |
P322 | |
P330 | Rinse mouth. |
P331 | Do NOT induce vomiting. |
P332 | IF SKIN irritation occurs: |
P333 | If skin irritation or rash occurs: |
P334 | Immerse in cool water/wrap n wet bandages. |
P335 | Brush off loose particles from skin. |
P336 | Thaw frosted parts with lukewarm water. Do not rub affected area. |
P337 | If eye irritation persists: |
P338 | Remove contact lenses, if present and easy to do. Continue rinsing. |
P340 | Remove victim to fresh air and keep at rest in a position comfortable for breathing. |
P341 | If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing. |
P342 | If experiencing respiratory symptoms: |
P350 | Gently wash with plenty of soap and water. |
P351 | Rinse cautiously with water for several minutes. |
P352 | Wash with plenty of soap and water. |
P353 | Rinse skin with water/shower. |
P360 | Rinse immediately contaminated clothing and skin with plenty of water before removing clothes. |
P361 | Remove/Take off immediately all contaminated clothing. |
P362 | Take off contaminated clothing and wash before reuse. |
P363 | Wash contaminated clothing before reuse. |
P370 | In case of fire: |
P371 | In case of major fire and large quantities: |
P372 | Explosion risk in case of fire. |
P373 | DO NOT fight fire when fire reaches explosives. |
P374 | Fight fire with normal precautions from a reasonable distance. |
P376 | Stop leak if safe to do so. Oxidising gases (section 2.4) 1 |
P377 | Leaking gas fire: Do not extinguish, unless leak can be stopped safely. |
P378 | |
P380 | Evacuate area. |
P381 | Eliminate all ignition sources if safe to do so. |
P390 | Absorb spillage to prevent material damage. |
P391 | Collect spillage. Hazardous to the aquatic environment |
P301 + P310 | IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician. |
P301 + P312 | IF SWALLOWED: call a POISON CENTER or doctor/physician IF you feel unwell. |
P301 + P330 + P331 | IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. |
P302 + P334 | IF ON SKIN: Immerse in cool water/wrap in wet bandages. |
P302 + P350 | IF ON SKIN: Gently wash with plenty of soap and water. |
P303 + P361 + P353 | IF ON SKIN (or hair): Remove/Take off Immediately all contaminated clothing. Rinse SKIN with water/shower. |
P304 + P312 | IF INHALED: Call a POISON CENTER or doctor/physician if you feel unwell. |
P304 + P340 | IF INHALED: Remove victim to fresh air and Keep at rest in a position comfortable for breathing. |
P304 + P341 | IF INHALED: If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing. |
P305 + P351 + P338 | IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. |
P306 + P360 | IF ON CLOTHING: Rinse Immediately contaminated CLOTHING and SKIN with plenty of water before removing clothes. |
P307 + P311 | IF exposed: call a POISON CENTER or doctor/physician. |
P308 + P313 | IF exposed or concerned: Get medical advice/attention. |
P309 + P311 | IF exposed or if you feel unwell: call a POISON CENTER or doctor/physician. |
P332 + P313 | IF SKIN irritation occurs: Get medical advice/attention. |
P333 + P313 | IF SKIN irritation or rash occurs: Get medical advice/attention. |
P335 + P334 | Brush off loose particles from skin. Immerse in cool water/wrap in wet bandages. |
P337 + P313 | IF eye irritation persists: Get medical advice/attention. |
P342 + P311 | IF experiencing respiratory symptoms: call a POISON CENTER or doctor/physician. |
P370 + P376 | In case of fire: Stop leak if safe to Do so. |
P370 + P378 | In case of fire: |
P370 + P380 | In case of fire: Evacuate area. |
P370 + P380 + P375 | In case of fire: Evacuate area. Fight fire remotely due to the risk of explosion. |
P371 + P380 + P375 | In case of major fire and large quantities: Evacuate area. Fight fire remotely due to the risk of explosion. |
Storage | |
Code | Phrase |
P401 | |
P402 | Store in a dry place. |
P403 | Store in a well-ventilated place. |
P404 | Store in a closed container. |
P405 | Store locked up. |
P406 | Store in corrosive resistant/ container with a resistant inner liner. |
P407 | Maintain air gap between stacks/pallets. |
P410 | Protect from sunlight. |
P411 | |
P412 | Do not expose to temperatures exceeding 50 oC/ 122 oF. |
P413 | |
P420 | Store away from other materials. |
P422 | |
P402 + P404 | Store in a dry place. Store in a closed container. |
P403 + P233 | Store in a well-ventilated place. Keep container tightly closed. |
P403 + P235 | Store in a well-ventilated place. Keep cool. |
P410 + P403 | Protect from sunlight. Store in a well-ventilated place. |
P410 + P412 | Protect from sunlight. Do not expose to temperatures exceeding 50 oC/122oF. |
P411 + P235 | Keep cool. |
Disposal | |
Code | Phrase |
P501 | Dispose of contents/container to ... |
P502 | Refer to manufacturer/supplier for information on recovery/recycling |
Physical hazards | |
Code | Phrase |
H200 | Unstable explosive |
H201 | Explosive; mass explosion hazard |
H202 | Explosive; severe projection hazard |
H203 | Explosive; fire, blast or projection hazard |
H204 | Fire or projection hazard |
H205 | May mass explode in fire |
H220 | Extremely flammable gas |
H221 | Flammable gas |
H222 | Extremely flammable aerosol |
H223 | Flammable aerosol |
H224 | Extremely flammable liquid and vapour |
H225 | Highly flammable liquid and vapour |
H226 | Flammable liquid and vapour |
H227 | Combustible liquid |
H228 | Flammable solid |
H229 | Pressurized container: may burst if heated |
H230 | May react explosively even in the absence of air |
H231 | May react explosively even in the absence of air at elevated pressure and/or temperature |
H240 | Heating may cause an explosion |
H241 | Heating may cause a fire or explosion |
H242 | Heating may cause a fire |
H250 | Catches fire spontaneously if exposed to air |
H251 | Self-heating; may catch fire |
H252 | Self-heating in large quantities; may catch fire |
H260 | In contact with water releases flammable gases which may ignite spontaneously |
H261 | In contact with water releases flammable gas |
H270 | May cause or intensify fire; oxidizer |
H271 | May cause fire or explosion; strong oxidizer |
H272 | May intensify fire; oxidizer |
H280 | Contains gas under pressure; may explode if heated |
H281 | Contains refrigerated gas; may cause cryogenic burns or injury |
H290 | May be corrosive to metals |
Health hazards | |
Code | Phrase |
H300 | Fatal if swallowed |
H301 | Toxic if swallowed |
H302 | Harmful if swallowed |
H303 | May be harmful if swallowed |
H304 | May be fatal if swallowed and enters airways |
H305 | May be harmful if swallowed and enters airways |
H310 | Fatal in contact with skin |
H311 | Toxic in contact with skin |
H312 | Harmful in contact with skin |
H313 | May be harmful in contact with skin |
H314 | Causes severe skin burns and eye damage |
H315 | Causes skin irritation |
H316 | Causes mild skin irritation |
H317 | May cause an allergic skin reaction |
H318 | Causes serious eye damage |
H319 | Causes serious eye irritation |
H320 | Causes eye irritation |
H330 | Fatal if inhaled |
H331 | Toxic if inhaled |
H332 | Harmful if inhaled |
H333 | May be harmful if inhaled |
H334 | May cause allergy or asthma symptoms or breathing difficulties if inhaled |
H335 | May cause respiratory irritation |
H336 | May cause drowsiness or dizziness |
H340 | May cause genetic defects |
H341 | Suspected of causing genetic defects |
H350 | May cause cancer |
H351 | Suspected of causing cancer |
H360 | May damage fertility or the unborn child |
H361 | Suspected of damaging fertility or the unborn child |
H361d | Suspected of damaging the unborn child |
H362 | May cause harm to breast-fed children |
H370 | Causes damage to organs |
H371 | May cause damage to organs |
H372 | Causes damage to organs through prolonged or repeated exposure |
H373 | May cause damage to organs through prolonged or repeated exposure |
Environmental hazards | |
Code | Phrase |
H400 | Very toxic to aquatic life |
H401 | Toxic to aquatic life |
H402 | Harmful to aquatic life |
H410 | Very toxic to aquatic life with long-lasting effects |
H411 | Toxic to aquatic life with long-lasting effects |
H412 | Harmful to aquatic life with long-lasting effects |
H413 | May cause long-lasting harmful effects to aquatic life |
H420 | Harms public health and the environment by destroying ozone in the upper atmosphere |
Sorry,this product has been discontinued.
Home
* Country/Region
* Quantity Required :
* Cat. No.:
* CAS No :
* Product Name :
* Additional Information :
Total Compounds: mg
The concentration of the dissolution solution you need to prepare is mg/mL