Purity | Size | Price | VIP Price | USA Stock *0-1 Day | Global Stock *5-7 Days | Quantity | |||||
{[ item.p_purity ]} | {[ item.pr_size ]} |
{[ getRatePrice(item.pr_usd, 1,1) ]} {[ getRatePrice(item.pr_usd,item.pr_rate,item.mem_rate) ]} |
{[ getRatePrice(item.pr_usd, 1,1) ]} | Inquiry {[ getRatePrice(item.pr_usd,item.pr_rate,item.mem_rate) ]} {[ getRatePrice(item.pr_usd,1,item.mem_rate) ]} | {[ item.pr_usastock ]} | Inquiry - | {[ item.pr_chinastock ]} | Inquiry - |
* Storage: {[proInfo.prStorage]}
CAS No. : | 22916-47-8 | MDL No. : | MFCD00216019 |
Formula : | C18H14Cl4N2O | Boiling Point : | - |
Linear Structure Formula : | - | InChI Key : | BYBLEWFAAKGYCD-UHFFFAOYSA-N |
M.W : | 416.13 | Pubchem ID : | 4189 |
Synonyms : |
R18134
|
Chemical Name : | 1-(2-((2,4-Dichlorobenzyl)oxy)-2-(2,4-dichlorophenyl)ethyl)-1H-imidazole |
Num. heavy atoms : | 25 |
Num. arom. heavy atoms : | 17 |
Fraction Csp3 : | 0.17 |
Num. rotatable bonds : | 6 |
Num. H-bond acceptors : | 2.0 |
Num. H-bond donors : | 0.0 |
Molar Refractivity : | 103.2 |
TPSA : | 27.05 Ų |
GI absorption : | High |
BBB permeant : | No |
P-gp substrate : | No |
CYP1A2 inhibitor : | Yes |
CYP2C19 inhibitor : | Yes |
CYP2C9 inhibitor : | Yes |
CYP2D6 inhibitor : | Yes |
CYP3A4 inhibitor : | Yes |
Log Kp (skin permeation) : | -4.63 cm/s |
Log Po/w (iLOGP) : | 3.69 |
Log Po/w (XLOGP3) : | 5.93 |
Log Po/w (WLOGP) : | 5.98 |
Log Po/w (MLOGP) : | 4.31 |
Log Po/w (SILICOS-IT) : | 5.88 |
Consensus Log Po/w : | 5.16 |
Lipinski : | 1.0 |
Ghose : | None |
Veber : | 0.0 |
Egan : | 1.0 |
Muegge : | 1.0 |
Bioavailability Score : | 0.55 |
Log S (ESOL) : | -6.26 |
Solubility : | 0.000227 mg/ml ; 0.000000546 mol/l |
Class : | Poorly soluble |
Log S (Ali) : | -6.27 |
Solubility : | 0.000222 mg/ml ; 0.000000534 mol/l |
Class : | Poorly soluble |
Log S (SILICOS-IT) : | -8.41 |
Solubility : | 0.0000016 mg/ml ; 0.0000000038 mol/l |
Class : | Poorly soluble |
PAINS : | 0.0 alert |
Brenk : | 0.0 alert |
Leadlikeness : | 2.0 |
Synthetic accessibility : | 3.13 |
Signal Word: | Warning | Class: | N/A |
Precautionary Statements: | P261-P280-P305+P351+P338 | UN#: | N/A |
Hazard Statements: | H302-H315-H319-H332-H335 | Packing Group: | N/A |
GHS Pictogram: |
* All experimental methods are cited from the reference, please refer to the original source for details. We do not guarantee the accuracy of the content in the reference.
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
(Comparative Example 8) Pulverization of miconazole was performed in the same manner as in Comparative Example 1. The average particle diameter of the resulting miconazole was 651 nm. |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
1-[2,4-Dichloro-beta-(2,4-dichlorobenzyloxy)phenethyl]-3-(p-methylbenzyl)imidazolium bromide; mp. 152.2° C., by the reaction of 1-[2,4-dichloro-beta-(2,4-dichlorobenzyloxy)phenethyl]-imidazole and p-methylbenzyl bromide. |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
In acetonitrile; | EXAMPLE XXXIII In a similar operation and employing recovery techniques similar to Example XXXII, but employing different amounts of reactants or different purification techniques as indicated, the following compounds are prepared: 1-[2,4-dichloro-beta-(2,4-dichlorobenzyloxy)phenethyl]-3-[N-(2,5-dimethoxyphenyl)carbamoylmethyl]imidazolium chloride monohydrate, m.p. 121.1° C., by (a) refluxing for 2 days, 4.2 parts of 1-[2,4-dichloro-beta-(2,4-dichlorobenzyloxy)phenethyl]imidazole, 2.5 parts of 2-chloroaceto-2',5'-dimethoxyanilide and 40 parts of acetonitrile, (b) recovering as in Example XXXII, and (c) washing the crude product with ether. |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
In isopropyl alcohol; acetone; | EXAMPLE XVI 15 parts of 1-[2,4-dichloro-beta-(2,4-dichlorobenzyloxy)-phenethyl]imidazole and 60 parts of 2,4-dichlorobenzyl chloride are mixed together in 120 parts of acetone as solvent and the resulting mixture is stirred at reflux temperature for 40 hours. At the end of this period, the mixture is warmed to evaporate off most of the solvent and the residue is poured onto diisopropyl ether, whereupon the 1-(2,4-dichlorobenzyl)-3-[2,4-dichloro-beta-(2,4-dichlorobenzyloxy)phenethyl]imidazolium chloride product separates as an oil. The ether is decanted off and the oily residue is washed with warm xylene and thereafter triturated in 2-propanol whereupon the oily product solidified. The solid product is filtered off, washed with 2-propanol and dried to obtain a purified product, 1-(2,4-dichlorobenzyl)-3-[2,4-dichloro-beta-(2,4-dichlorobenzyloxy)phenethyl]-imidazolium chloride, mp. 178.9° C. |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
1-[2,4-Dichloro-beta-(2,4-dichlorobenzyloxy)phenethyl]-3-(m-methylbenzyl)imidazolium bromide; mp. 99°-101° C., by the reaction of 1-[2,4-dichloro-beta-(2,4-dichlorobenzyloxy)phenethyl]-imidazole and m-methylbenzyl bromide. |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
1-[2,4-dichloro-beta-(2,4-dichlorobenzyloxy)phenethyl]3-n-octylimidazolium bromide; mp. 141.5°-143° C., from 1-[2,4dichloro-beta-(2,4-dichlorobenzyloxy)phenethyl]imidazole and n-octyl bromide after an overnight reflux. |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
1-decyl-3-[2,4-dichloro-beta-(2,4-dichlorobenzyloxy)phenethyl]imidazolium bromide; mp. 90°-94° C., by the reaction of 1-[2,4-dichloro-beta-(2,4-dichlorobenzyloxy)phenethyl]imidazole and n-decyl bromide after an overnight reflux. |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
1-[2,4-dichloro-beta-(2,4-dichlorobenzyloxy)phenethyl]-3-[N-(2,6-xylyl)carbamoylmethyl]-imidazolium chloride hydrate, m.p. 143°-150° C., by the reaction of 1-[2,4-dichloro-beta-(2,4-dichlorobenzyloxy)phenethyl]imidazole and 2-chloroaceto-2',6'-xylidide. |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
In di-isopropyl ether; acetonitrile; | A. A mixture of 4.2 parts of 1-[2,4-dichloro-beta-(2,4-dichlorobenzyloxy)phenethyl]imidazole, 2.7 parts of 2,4-dichlorocinnamylchloride and 40 parts of acetonitrile is stirred and refluxed overnight. Upon the addition of diisopropyl ether, the product crystallizes. It is filtered off and dried, yielding 5.8 parts of 1-(2,4-dichlorocinnamyl)-3-[2,4-dichloro-beta-(2,4-dichlorobenzyloxy)phenethyl]-imidazolium chloride; mp. 142.2° C. |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
1-[2-(p-Bromobenzoyl)ethyl]-3-[2,4-dichloro-beta-(2,4-dichlorobenzyloxy)phenethyl]imidazolium chloride, m.p. 161.5° C., yield 11.5 parts, by the reaction of 8.3 parts of 1-[2,4-dichloro-beta(2,4-dichlorobenzyloxy)phenethyl]imidazole and 5 parts of 4'-bromo3-chloropropiophenone. |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
EXAMPLE XV In a manner similar to that described in Examples XIII and XIV, 1-(p-bromobenzoylmethyl)-3-[2,4-dichloro-beta-(2,4 -dichlorobenzyloxy)phenethyl]imidazolium chloride is prepared by the reaction of 1-[2,4-dichloro-beta-(2,4-dichlorobenzyloxy)phenethyl]imidazole and 4'-bromo-2-chloroacetophenone. The product after successive treatment steps of stirring with 4-methyl-2-pentanone, stirring a chloroform solution thereof with silica gel and triturating with 4-methyl-2-pentanone has a melting point of 198.2° C. |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
In dichloromethane; di-isopropyl ether; | EXAMPLE X 4.2 Parts of 1-[2,4-dichloro-beta-(2,4-dichlorobenzyloxy)-phenethyl]imidazole, 3.7 parts of p-chlorobenzyl iodide and 56 parts of methylene chloride are mixed together and stirred at reflux temperature for 5 hours to obtain a 1-(p-chlorobenzyl)-3-[2,4-dichlorobeta-(2,4-dichlorobenzyloxy)phenethyl imidazolium iodide product which remains in the reaction mixture. The reaction mixture is warmed to evaporate off the solvent and to recover the product as residue. The crude product is purified by washing with 2-propanol and crystallizing from a mixture of 4-methyl-2-pentanone and diisopropyl ether, to yield 1-(p-chlorobenzyl)-3-[2,4-dichloro-beta-(2,4-dichlorobenzyloxy)phenethyl]imidazolium iodide; m.p. 145°- 148° C. |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
In methanol; di-isopropyl ether; acetone; | EXAMPLE XVII 4.2 parts of 1-[2,4-dichloro-beta-(2,4-dichlorobenzyloxy)phenethyl]imidazole and 2.7 parts of alpha-bromo-5-nitrotoluonitrile are mixed together in 24 parts of methanol as solvent and the resulting mixture is stirred at reflux temperature overnight. At the end of this period, the solvent is evaporated off to obtain a crude 1-(2-cyano-4-nitrobenzyl)-3-[2,4-dichloro-beta-(2,4-dichlorobenzyloxy)phenethyl]imidazolium bromide product as a residue. The residue is purified by triturating in acetone, and crystallizing from a mixture of methanol and diisopropyl ether to yield pure 1-(2-cyano-4-nitrobenzyl)-3-[2,4-dichloro-beta-(2,4-dichlorobenzyloxy)phenethyl]imidazolium bromide; mp. 171°-173° C. |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
1-[2,4-dichloro-beta-(2,4-dichlorobenzyloxy)phenethyl]-3-[N-(2,5-xylyl)carbamoylmethyl]imidazolium chloride; mp. 178° C., from 1-[2,4-dichloro-beta-(2,4-dichlorobenzyloxy)phenethyl]imidazole and 2-chloroaceto-2',5'-xylidide after an overnight reflux. |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
1-[2,4-dichloro-beta-(2,4-dichlorobenzyloxy)phenethyl]-3-[N-(3,4-dichlorophenyl)carbamoyloxy]imidazolium chloride hydrate, m.p. 117°-200° C., by the reaction of 1-[2,4-dichloro-beta-(2,4-dichlorobenzyloxy)phenethyl]imidazole and 2,2',4'-trichloroacetanilide, purification as above described followed by recrystallization from ethanol-water. |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
In acetonitrile; | EXAMPLE XXIII A mixture of 8 parts of 1-[2,4-dichloro-beta-(2,4-dichlorobenzyloxy)phenethyl]imidazole, 5.6 parts of 2-bromo-N-(p-methylbenzyl)propionamide and 80 parts of acetonitrile is stirred and refluxed for 20 hours. The reaction mixture is evaporated and the residue is crystallized from a mixture of 4-methyl-2-pentanone and diisopropyl ether, yielding 9 parts of 1-[2,4-dichloro-beta-(2,4-dichlorobenzyloxy)phenethyl]-3-{1-[N-(p-methylbenzyl)carbamoyl]ethyl}-imidazolium bromide; mp. 136.2° C. |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
1-{1-[N-(p-Chlorobenzyl)carbamoyl]ethyl} -3-[2,4-dichlorobeta-(2,4-dichlorobenzyloxy)phenethyl]imidazolium bromide; m.p. 162.1° C., yield 3 parts, by the reaction of 8 parts of 1-[2,4-dichloro-beta(2,4-dichlorobenzyloxy)phenethyl]imidazole and 6 parts of 2-bromo-N-(p-chlorobenzyl)propionamide. imidazole |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
EXAMPLE XXVIII In operations carried out in a manner similar to those described in Examples XXVI and XXVII, the following compounds are prepared: 1-[2,4-dichloro-beta-(2,4-dichlorobenzyloxy)phenethyl]-3-[N-(2,5-dichlorophenyl)carbamoylmethyl]imidazolium chloride; m.p. 137.8° C., by the reaction of 1-[2,4-dichloro-beta-(2,4-dichlorobenzyloxy)phenethyl]imidazole and 2,2',5'-trichloroacetanilide. |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
1-[2,4-Dichloro-beta-(2,4-dichlorobenzyloxy)phenethyl]-3-{1-[N-(p-methoxybenzyl)carbamoyl]ethyl]imidazolium bromide, m.p. 136° C., yield 8 parts, by the reaction of 8 parts of 1-[2,4dichloro-beta-(2,4-dichlorobenzyloxy)phenethyl]imidazole and 5.9 parts of 2-bromo-N-(p-methoxybenzyl)propionamide. |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
1-[2,4-Dichloro-beta-(2,4-dichlorobenzyloxy)phenethyl]-3-(p-fluorobenzyl)-imidazolium iodide; mp. 151°-153° C., by the reaction of 1-[2,4-dichloro-beta-(2,4-dichlorobenzyloxy)phenethyl]-imidazole and p-fluorobenzyl iodide. 1-[2,4-Dichloro-beta-(2,4-dichlorobenzyloxy)phenethyl]-3-(o-nitrobenzyl(imidazolium bromide; mp. 138.5°-141° C., by the reaction of 1-[2,4-dichloro-beta-(2,4-dichlorobenzyloxy)phenethyl]-imidazole and o-nitrobenzyl bromide. |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
With colistin sulfate-based polymer monolithic column; In methanol; water; at 20℃;Resolution of racemate; Green chemistry; | General procedure: The colistin sulfate-based polymer monolithic capillary column was prepared as describedabove and investigated for the nano-LC enantioseparation of a set of different classes of racemicpharmaceuticals, namely: beta-blockers, alpha-blockers, anti-inflammatory drugs, antifungal drugs,norepinephrine-dopamine reuptake inhibitors, catecholamines, sedative hypnotics, antihistamines,antibacterial drugs, anticancer drugs and antiarrhythmic drugs. Although reversed phaseenantio-selective LC examples are limited, macrocyclic antibiotics were previously used inenantioseparation chromatography under reversed phase chromatographic mode [34,36-38,42-45].The initial mobile phase selected for the enantioseparation separation of racemates 1-37 (Figure 3) wasa binary mixture of methanol/water screened from 95:5 to 5:95 nu/nu at 1 mL/min flow rate at fixed UVdetection 219 nm with eleven compounds separated (Rs 1) (Table 1). For examples, in MeOH/H2O80:20 nu/nu, only ibuprofen (7) was separated, while in MeOH/H2O 40:60, indoprofen (10), hexaconazole(15) and <strong>[22916-47-8]miconazole</strong> (16) were separated. In MeOH/H2O 10:90 nu/nu, aminoglutethimide (22), tyrosine(29) and O-methoxymandelic acid (34) were also separated. The addition of an additive, namelytriethylamine (TEA) 1% nu/nu in 10:90, resulted in the separation of acebutolol (4) normetanephrine(21), propafenone (26), tyrosine (29) and 4-hydroxy-3-methoxymandelic acid (35) (Figure 4), whilenon-acceptable separations were achieved by addition of the acidic additive namely trifluoroaceticacid (TFA). In an attempt to use normal phase namely n-hexane/2-propanol mixture ranging from10-90% (nu/nu) resulted in resolution less than 1. All chromatographic data are summarized in Table 1. |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
In methanol;Gas phase; Alkaline conditions; | General procedure: The sampled ions were generated in the gas-phase by directly infusing a slightly basic solution of FeIII(PPIX)Cl and azole ligand, both compounds 1 x 10-5 M in methanol, through a fused-silica capillary to the ESI source by a syringe pump at a flow rate of 10 muL/min. Typical values of declustering potential and entrance potential were 80 and 5 V, respectively. Full scan positive-ion ESI mass spectra of a 10-5 M 1:1 methanolic solution of FeIII(PPIX)Cl complexed with the five different azole ligands and the two model ligands N-Me-Im and Tri are reported in Figs. S1 and S2 in the Supplementary data. CID experiments at variable energy were carried out using an Applied Biosystems 2000 Q-Trap instrument, a commercial hybrid triple-quadrupole linear ion trap mass spectrometer (Q1q2QLIT). The ions were desolvated in the first region (Q0) at a temperature of 373 K using argonand then mass selected by the first quadrupole (Q1). They werethen allowed to collide with argon (3.1 105 mbar) in the q2 collision cell while monitoring the product ion abundance as a function of collision energy (Elab = 0-50 eV). There is only one dissociation channel for each complex of interest, involving the loss of the neutral azole ligand. The dissociation product pattern was monitored by scanning QLIT by using the enhanced mode of operation where the ions, formed in q2, are trapped in QLIT for 35 accumulation spectra in order to increase both resolution and signal intensity. |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
100% | In acetonitrile; at 50℃; for 6h; | To a solution of 4-((l,3-bis(dodecanoyloxy)propan-2-yl)oxy)-4-oxobutanoic acid 6A (6.0 g, 0.013 mol) in acetonitrile (150 mL) was added l-(2-((2,4-dichlorobenzyl)oxy)-2-(2,4- dichlorophenyl)ethyl)-lH-imidazole 7 (5.62 g, 0.013 mol) at ambient temperature. The resulting reaction mixture was heated up to 50°C for next 6h followed by the evaporation of solvent under reduced pressure to get the desired product 8 as colorless viscous oil. Yield: 11.62 g, quant. |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
86.96% | In methanol for 3h; Reflux; | [Cr(MCNZ)(NO3)3] (2) was prepared by adding (400 mg,1 mmol) of Cr(NO3)3*9H2O to MCNZ (416 mg, 1 mmol) dissolved inmethanol. The mixture was refluxed for 3 h. The green precipitatewas filtered off, washed with diethyl ether and dried out. Yield:86.96% (521 mg). M.p. 180 C. Elm. Anal. Calc. (C18H14Cl4CrN5O10) C, 33.05; H, 2.16; Cl, 21.68; Cr, 7.95; N, 10.71; O, 24.46; IR: (C]C)1587 cm1, (C]N) 1561 cm1, (CeC) 1290 cm1, (CeOeC)1090 cm1, (CeCl) 786 cm1, (CeH) 3154 cm1, n(NO3) 1378 cm1,d(NO3) 1041 cm1. (CreN) 420 cm1, (CreO) 471 cm1. |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
92% | In ethanol at 20℃; for 24h; | |
82% | In ethanol; water at 20℃; for 24h; |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
82% | In ethanol; water at 20℃; for 24h; |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
82% | In ethanol; water at 20℃; for 24h; |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
65% | In ethanol; water at 20℃; for 24h; |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
88% | With (dmpe)<SUB>2</SUB>FeCl<SUB>2</SUB>; deuterated methanol; 4,4,5,5-tetramethyl-1,3,2-dioxaborolane; sodium tertiary butoxide In tetrahydrofuran at 60℃; for 15h; Inert atmosphere; Irradiation; |
Yield | Reaction Conditions | Operation in experiment |
---|---|---|
78.78% | In ethanol | 2.2.1. Synthesis of [Cu(CTZ)2(H2O)2Cl2] Synthesis of [Cu(CTZ)2(H2O)2Cl2] a mixture of CuCl2.2H2O (170mg, 1 mmol) and CTZ (689.70 mg, 2 mmol) dissolved in 25 mL ethanol.The mixture was refluxed and yellowish green precipitate was filteredand washed with diethyl ether then dried out. Yield: 79.12% (680 mg).M.P. 242 C. IR: ν (H2O)3344, ν (C- -C) 1587, ν (C- -N) 1489, ν (C-C)1324, ν (C-N) 1220, ν (C-Cl) 742, ν (Cu-O) 590, ν (Cu-N) 466, ν (Cu-Cl)390. |
78.78% | In ethanol | 2.2.1. Synthesis of [Cu(CTZ)2(H2O)2Cl2] Synthesis of [Cu(CTZ)2(H2O)2Cl2] a mixture of CuCl2.2H2O (170mg, 1 mmol) and CTZ (689.70 mg, 2 mmol) dissolved in 25 mL ethanol.The mixture was refluxed and yellowish green precipitate was filteredand washed with diethyl ether then dried out. Yield: 79.12% (680 mg).M.P. 242 C. IR: ν (H2O)3344, ν (C- -C) 1587, ν (C- -N) 1489, ν (C-C)1324, ν (C-N) 1220, ν (C-Cl) 742, ν (Cu-O) 590, ν (Cu-N) 466, ν (Cu-Cl)390. |
Tags: 22916-47-8 synthesis path| 22916-47-8 SDS| 22916-47-8 COA| 22916-47-8 purity| 22916-47-8 application| 22916-47-8 NMR| 22916-47-8 COA| 22916-47-8 structure
A625321[ 22832-87-7 ]
1-(2-((2,4-Dichlorobenzyl)oxy)-2-(2,4-dichlorophenyl)ethyl)-1H-imidazole nitrate
Reason: Free-salt
Precautionary Statements-General | |
Code | Phrase |
P101 | If medical advice is needed,have product container or label at hand. |
P102 | Keep out of reach of children. |
P103 | Read label before use |
Prevention | |
Code | Phrase |
P201 | Obtain special instructions before use. |
P202 | Do not handle until all safety precautions have been read and understood. |
P210 | Keep away from heat/sparks/open flames/hot surfaces. - No smoking. |
P211 | Do not spray on an open flame or other ignition source. |
P220 | Keep/Store away from clothing/combustible materials. |
P221 | Take any precaution to avoid mixing with combustibles |
P222 | Do not allow contact with air. |
P223 | Keep away from any possible contact with water, because of violent reaction and possible flash fire. |
P230 | Keep wetted |
P231 | Handle under inert gas. |
P232 | Protect from moisture. |
P233 | Keep container tightly closed. |
P234 | Keep only in original container. |
P235 | Keep cool |
P240 | Ground/bond container and receiving equipment. |
P241 | Use explosion-proof electrical/ventilating/lighting/equipment. |
P242 | Use only non-sparking tools. |
P243 | Take precautionary measures against static discharge. |
P244 | Keep reduction valves free from grease and oil. |
P250 | Do not subject to grinding/shock/friction. |
P251 | Pressurized container: Do not pierce or burn, even after use. |
P260 | Do not breathe dust/fume/gas/mist/vapours/spray. |
P261 | Avoid breathing dust/fume/gas/mist/vapours/spray. |
P262 | Do not get in eyes, on skin, or on clothing. |
P263 | Avoid contact during pregnancy/while nursing. |
P264 | Wash hands thoroughly after handling. |
P265 | Wash skin thouroughly after handling. |
P270 | Do not eat, drink or smoke when using this product. |
P271 | Use only outdoors or in a well-ventilated area. |
P272 | Contaminated work clothing should not be allowed out of the workplace. |
P273 | Avoid release to the environment. |
P280 | Wear protective gloves/protective clothing/eye protection/face protection. |
P281 | Use personal protective equipment as required. |
P282 | Wear cold insulating gloves/face shield/eye protection. |
P283 | Wear fire/flame resistant/retardant clothing. |
P284 | Wear respiratory protection. |
P285 | In case of inadequate ventilation wear respiratory protection. |
P231 + P232 | Handle under inert gas. Protect from moisture. |
P235 + P410 | Keep cool. Protect from sunlight. |
Response | |
Code | Phrase |
P301 | IF SWALLOWED: |
P304 | IF INHALED: |
P305 | IF IN EYES: |
P306 | IF ON CLOTHING: |
P307 | IF exposed: |
P308 | IF exposed or concerned: |
P309 | IF exposed or if you feel unwell: |
P310 | Immediately call a POISON CENTER or doctor/physician. |
P311 | Call a POISON CENTER or doctor/physician. |
P312 | Call a POISON CENTER or doctor/physician if you feel unwell. |
P313 | Get medical advice/attention. |
P314 | Get medical advice/attention if you feel unwell. |
P315 | Get immediate medical advice/attention. |
P320 | |
P302 + P352 | IF ON SKIN: wash with plenty of soap and water. |
P321 | |
P322 | |
P330 | Rinse mouth. |
P331 | Do NOT induce vomiting. |
P332 | IF SKIN irritation occurs: |
P333 | If skin irritation or rash occurs: |
P334 | Immerse in cool water/wrap n wet bandages. |
P335 | Brush off loose particles from skin. |
P336 | Thaw frosted parts with lukewarm water. Do not rub affected area. |
P337 | If eye irritation persists: |
P338 | Remove contact lenses, if present and easy to do. Continue rinsing. |
P340 | Remove victim to fresh air and keep at rest in a position comfortable for breathing. |
P341 | If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing. |
P342 | If experiencing respiratory symptoms: |
P350 | Gently wash with plenty of soap and water. |
P351 | Rinse cautiously with water for several minutes. |
P352 | Wash with plenty of soap and water. |
P353 | Rinse skin with water/shower. |
P360 | Rinse immediately contaminated clothing and skin with plenty of water before removing clothes. |
P361 | Remove/Take off immediately all contaminated clothing. |
P362 | Take off contaminated clothing and wash before reuse. |
P363 | Wash contaminated clothing before reuse. |
P370 | In case of fire: |
P371 | In case of major fire and large quantities: |
P372 | Explosion risk in case of fire. |
P373 | DO NOT fight fire when fire reaches explosives. |
P374 | Fight fire with normal precautions from a reasonable distance. |
P376 | Stop leak if safe to do so. Oxidising gases (section 2.4) 1 |
P377 | Leaking gas fire: Do not extinguish, unless leak can be stopped safely. |
P378 | |
P380 | Evacuate area. |
P381 | Eliminate all ignition sources if safe to do so. |
P390 | Absorb spillage to prevent material damage. |
P391 | Collect spillage. Hazardous to the aquatic environment |
P301 + P310 | IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician. |
P301 + P312 | IF SWALLOWED: call a POISON CENTER or doctor/physician IF you feel unwell. |
P301 + P330 + P331 | IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. |
P302 + P334 | IF ON SKIN: Immerse in cool water/wrap in wet bandages. |
P302 + P350 | IF ON SKIN: Gently wash with plenty of soap and water. |
P303 + P361 + P353 | IF ON SKIN (or hair): Remove/Take off Immediately all contaminated clothing. Rinse SKIN with water/shower. |
P304 + P312 | IF INHALED: Call a POISON CENTER or doctor/physician if you feel unwell. |
P304 + P340 | IF INHALED: Remove victim to fresh air and Keep at rest in a position comfortable for breathing. |
P304 + P341 | IF INHALED: If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing. |
P305 + P351 + P338 | IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. |
P306 + P360 | IF ON CLOTHING: Rinse Immediately contaminated CLOTHING and SKIN with plenty of water before removing clothes. |
P307 + P311 | IF exposed: call a POISON CENTER or doctor/physician. |
P308 + P313 | IF exposed or concerned: Get medical advice/attention. |
P309 + P311 | IF exposed or if you feel unwell: call a POISON CENTER or doctor/physician. |
P332 + P313 | IF SKIN irritation occurs: Get medical advice/attention. |
P333 + P313 | IF SKIN irritation or rash occurs: Get medical advice/attention. |
P335 + P334 | Brush off loose particles from skin. Immerse in cool water/wrap in wet bandages. |
P337 + P313 | IF eye irritation persists: Get medical advice/attention. |
P342 + P311 | IF experiencing respiratory symptoms: call a POISON CENTER or doctor/physician. |
P370 + P376 | In case of fire: Stop leak if safe to Do so. |
P370 + P378 | In case of fire: |
P370 + P380 | In case of fire: Evacuate area. |
P370 + P380 + P375 | In case of fire: Evacuate area. Fight fire remotely due to the risk of explosion. |
P371 + P380 + P375 | In case of major fire and large quantities: Evacuate area. Fight fire remotely due to the risk of explosion. |
Storage | |
Code | Phrase |
P401 | |
P402 | Store in a dry place. |
P403 | Store in a well-ventilated place. |
P404 | Store in a closed container. |
P405 | Store locked up. |
P406 | Store in corrosive resistant/ container with a resistant inner liner. |
P407 | Maintain air gap between stacks/pallets. |
P410 | Protect from sunlight. |
P411 | |
P412 | Do not expose to temperatures exceeding 50 oC/ 122 oF. |
P413 | |
P420 | Store away from other materials. |
P422 | |
P402 + P404 | Store in a dry place. Store in a closed container. |
P403 + P233 | Store in a well-ventilated place. Keep container tightly closed. |
P403 + P235 | Store in a well-ventilated place. Keep cool. |
P410 + P403 | Protect from sunlight. Store in a well-ventilated place. |
P410 + P412 | Protect from sunlight. Do not expose to temperatures exceeding 50 oC/122oF. |
P411 + P235 | Keep cool. |
Disposal | |
Code | Phrase |
P501 | Dispose of contents/container to ... |
P502 | Refer to manufacturer/supplier for information on recovery/recycling |
Physical hazards | |
Code | Phrase |
H200 | Unstable explosive |
H201 | Explosive; mass explosion hazard |
H202 | Explosive; severe projection hazard |
H203 | Explosive; fire, blast or projection hazard |
H204 | Fire or projection hazard |
H205 | May mass explode in fire |
H220 | Extremely flammable gas |
H221 | Flammable gas |
H222 | Extremely flammable aerosol |
H223 | Flammable aerosol |
H224 | Extremely flammable liquid and vapour |
H225 | Highly flammable liquid and vapour |
H226 | Flammable liquid and vapour |
H227 | Combustible liquid |
H228 | Flammable solid |
H229 | Pressurized container: may burst if heated |
H230 | May react explosively even in the absence of air |
H231 | May react explosively even in the absence of air at elevated pressure and/or temperature |
H240 | Heating may cause an explosion |
H241 | Heating may cause a fire or explosion |
H242 | Heating may cause a fire |
H250 | Catches fire spontaneously if exposed to air |
H251 | Self-heating; may catch fire |
H252 | Self-heating in large quantities; may catch fire |
H260 | In contact with water releases flammable gases which may ignite spontaneously |
H261 | In contact with water releases flammable gas |
H270 | May cause or intensify fire; oxidizer |
H271 | May cause fire or explosion; strong oxidizer |
H272 | May intensify fire; oxidizer |
H280 | Contains gas under pressure; may explode if heated |
H281 | Contains refrigerated gas; may cause cryogenic burns or injury |
H290 | May be corrosive to metals |
Health hazards | |
Code | Phrase |
H300 | Fatal if swallowed |
H301 | Toxic if swallowed |
H302 | Harmful if swallowed |
H303 | May be harmful if swallowed |
H304 | May be fatal if swallowed and enters airways |
H305 | May be harmful if swallowed and enters airways |
H310 | Fatal in contact with skin |
H311 | Toxic in contact with skin |
H312 | Harmful in contact with skin |
H313 | May be harmful in contact with skin |
H314 | Causes severe skin burns and eye damage |
H315 | Causes skin irritation |
H316 | Causes mild skin irritation |
H317 | May cause an allergic skin reaction |
H318 | Causes serious eye damage |
H319 | Causes serious eye irritation |
H320 | Causes eye irritation |
H330 | Fatal if inhaled |
H331 | Toxic if inhaled |
H332 | Harmful if inhaled |
H333 | May be harmful if inhaled |
H334 | May cause allergy or asthma symptoms or breathing difficulties if inhaled |
H335 | May cause respiratory irritation |
H336 | May cause drowsiness or dizziness |
H340 | May cause genetic defects |
H341 | Suspected of causing genetic defects |
H350 | May cause cancer |
H351 | Suspected of causing cancer |
H360 | May damage fertility or the unborn child |
H361 | Suspected of damaging fertility or the unborn child |
H361d | Suspected of damaging the unborn child |
H362 | May cause harm to breast-fed children |
H370 | Causes damage to organs |
H371 | May cause damage to organs |
H372 | Causes damage to organs through prolonged or repeated exposure |
H373 | May cause damage to organs through prolonged or repeated exposure |
Environmental hazards | |
Code | Phrase |
H400 | Very toxic to aquatic life |
H401 | Toxic to aquatic life |
H402 | Harmful to aquatic life |
H410 | Very toxic to aquatic life with long-lasting effects |
H411 | Toxic to aquatic life with long-lasting effects |
H412 | Harmful to aquatic life with long-lasting effects |
H413 | May cause long-lasting harmful effects to aquatic life |
H420 | Harms public health and the environment by destroying ozone in the upper atmosphere |
Sorry,this product has been discontinued.
Home
* Country/Region
* Quantity Required :
* Cat. No.:
* CAS No :
* Product Name :
* Additional Information :